Fleet Titan
← Back to the blog

Digital Vehicle Inspections: A Guide for UK Van Fleets

Driver checking a van tyre digitally

A digital vehicle inspection replaces the paper checklist with a phone or tablet check that the driver completes before the van moves. The result is a time-stamped record that the office can see straight away. For a fleet manager, the gain is simple: defects reach you the same morning, and every check and repair sits in one searchable place instead of a folder in a glovebox. This guide covers how the checks work, what the record must contain, how long to keep it and how to introduce it across your drivers.

Fleet-titan
Keep Daily Van Checks Visible
Fleet Titan brings daily checks, defect management and compliance reminders together to help managers oversee van fleet safety.

TL;DR

  • A digital vehicle inspection is a daily walkaround check completed on a phone or tablet, with defects reported to the manager immediately and stored electronically.
  • The DVSA accepts electronic defect records if the system offers a suitable digital signature, secure input and storage, and confirmation that the vehicle is roadworthy at the start of the journey.
  • Keep defect reports and repair records for at least 15 months, and keep nil-defect reports for at least 3 months.
  • Each defect should be linked to its repair, so an auditor can follow the story from report to fix.
  • Roll out in stages: one depot or team first, short driver training, then the whole fleet.

Table of Contents

What a digital vehicle inspection is

A digital vehicle inspection, sometimes called an electronic vehicle check, is the same walkaround a driver has always done, captured in software rather than on paper. The driver works through a list of items (tyres, lights, mirrors, fluid levels, load security, bodywork), marks each as fine or defective, adds notes, and submits. The record is stored against the van’s registration with the driver’s name and the time.

The DVSA’s roadworthiness guidance says that an electronic vehicle maintenance system can manage safety inspections, maintenance scheduling and driver defect reporting. So the idea is not a workaround. It is a recognised way of doing what the guidance already asks.

When people search for vehicle inspection software, they often find tools built for garages and body shops, where the inspection is used to sell repair work to a customer. A fleet is a different job. Your aim is to keep vans legal and on the road, prove that checks happened and get defects fixed before they become a prohibition, an accident or a missed job.

How drivers carry out a digital check

The routine is short, and it works best when it is the same every day.

  1. Open the check for the van. The driver selects the vehicle by registration, or picks it from the list assigned to them.
  2. Walk round and tick through the list. Each item is confirmed as satisfactory or flagged as a defect. Lights, tyres, windscreen and mirrors, brakes, steering, fluid levels, load area and security are the usual groups.
  3. Describe any defect. The driver adds a short note about what is wrong and where, so the office can judge how serious it is.
  4. Record the mileage and submit. The check is stamped with the date, time and driver.
  5. The manager is told. A reported defect appears in the fleet manager’s view straight away, rather than when the paper sheet is handed in at the end of the week.

The DVSA says a driver or designated responsible person must carry out a walkaround check before using the vehicle on the public highway, and at least one in every 24-hour period that the vehicle is in service. For a driver on a van that is used all day, that means the check before the first journey. For a van that sits on site overnight, it means the check on the next start.

A digital check should take a few minutes. If drivers find it slow, the list is probably too long or too vague. Keep it to the items that matter for the van type and let drivers add notes for anything unusual.

What happens when a driver finds a defect

The driver reports it at once. The manager then decides whether the van can still go out, books the repair and records what was done. The point of doing this digitally is that every step is logged: who reported it, who assessed it, what was fixed and when. If a van should not be driven, the manager can reassign the job to another vehicle before the customer is affected.

What the inspection record should include

The DVSA guidance sets out what a defect report should hold. Any defect found on the daily walkaround must be the subject of a written report by the driver or another person responsible for recording defects. The same guidance lists the details to capture:

Detail Why it matters
Vehicle registration or identification mark Ties the report to one vehicle
Date Shows when the defect was found
Details of the defect or symptoms Lets the manager assess the risk
Name of the reporter Shows who found it
Who it was reported to Shows the issue reached someone responsible
Assessment of the defect Records the decision on whether to drive
Rectification work Records what was done
Date the work was completed Closes the loop

The guidance also notes that it is common practice to use a composite form listing the items checked each day. Where practicable, the system should include nil reporting: the driver confirms the daily check was carried out and no defects were found.

Nil reports are records too

A day with no defects still needs a record. The DVSA calls it good practice to complete and keep nil defect reports, as they are a useful way of checking that drivers are doing their duties, and recommends keeping them for at least 3 months. A digital system makes this easy: a submitted check with nothing flagged is the nil report, and a missing check is visible to the manager the same morning.

The operator is responsible for assessing reported issues, arranging repairs and keeping a record of the action taken. Each repair should be linked to the original defect report so that an auditor can trace it. In software this is a status on the defect: reported, assessed, in repair, closed. On paper it is a matter of matching sheets from different places.

Defect report linked through four repair stages

How long to keep inspection records

For defect reports and repair records, the DVSA says they must be kept for at least 15 months. The same guidance accepts electronic records of reported defects, which must be available for 15 months along with any record of repair.

GOV.UK’s guidance for road transport managers says you must keep vehicle maintenance records for at least 15 months and give a copy to the traffic commissioners if they ask to see them.

In practice, the safest approach is to treat the 15 months as a rolling minimum for everything that relates to roadworthiness: defect reports, repair records and maintenance documents. Nil reports can be kept for a shorter period, at least 3 months, but there is rarely a reason to delete them early if the storage is cheap.

What the system itself has to provide

The DVSA does not accept just any spreadsheet. Its guidance says an electronic system must provide a suitable method of digital signature, secure data input and storage, and confirmation that the vehicle is in a roadworthy condition at the start of the journey. When you assess software, those are the three things to look for first.

Being ready for an audit

An old trade article on operator compliance notes that the legal position is simple: the operator is responsible for making sure vehicles on the licence are fit and serviceable, and for keeping records and producing them on request. It also points out that there are no set criteria for how often a vehicle should be inspected, since that depends on the manufacturer’s recommendations and the type of work. That is why your own inspection and maintenance schedule needs to be written down and followed.

A transport consultancy’s advice on records says they should be complete, accurate, well organised, secure from tampering, loss or damage, and easily retrievable within 10 minutes during an inspection. Searching a screen by registration or date is a quick way to meet that standard. Searching through a filing cabinet is not.

Being ready for an audit

Digital records compared with paper

Paper still works if it is completed every day and filed properly. The trouble is what happens around it: sheets are lost, handwriting is unreadable, and defects sit in a van until someone collects the book. Some operators run a hybrid, with paper walkaround checklists collected weekly and scanned, which shows how much of the effort goes into getting paper into a usable state.

Here is how the two compare on the points that matter to a van fleet:

Point Paper Digital
When the manager sees a defect When the sheet is handed in When the driver submits
Proof the check was done Signature on a sheet Time-stamped entry per driver and van
Finding a record Searching folders Searching by van, date or driver
Link between defect and repair Matching sheets by hand Status on the defect record
Reminders for MOT, tax, insurance Diary or spreadsheet Automatic reminders
Storage for 15 months Boxes and space Stored electronically

The central advantage is speed. A defect that is reported and seen in five minutes can be fixed before the van goes out on a job. The same defect on paper may be found on Friday.

Our view: the check is only the start

We built Fleet Titan around a simple observation: a daily check is only worth doing if what it finds leads somewhere. Many van fleets already have drivers who walk round their vans. What they lack is a trail that connects the check to the defect, the defect to the repair, and the repair to the next job on the schedule.

That is why our platform keeps daily checks, defect management, MOT, insurance and tax reminders, tools, jobs and customer quotes and invoicing in one place. When a manager opens the dashboard, they see the whole fleet: which vans have been checked, which have open defects, which documents are about to expire and which jobs depend on which van. Records are held separately for each company, so your data stays yours.

For construction firms and trades, we think tools matter as much as vans. A van that passes its check but is missing the right equipment still costs a day. So we treat tools and stock as part of the same compliance picture.

Our advice to any manager moving from paper: start with the daily check, because it builds the habit and the records. Then add reminders, then jobs. You will have a stronger fleet record within weeks, not years.

Curtis

Choosing and introducing digital checks across your fleet

Software is the easy part. Getting every driver to use it every morning is where fleets succeed or fail. These steps help.

Decide what you need to record

Start from the DVSA list above: registration, date, defect details, reporter, who it was reported to, assessment, rectification and completion date. Add whatever your own insurance, customers or contracts require. Then check that the software can produce each item without retyping.

Check the system against the DVSA’s three requirements

Ask how the software handles digital signature, secure input and storage, and confirmation that the vehicle is roadworthy at the start of the journey. Also look at how long records are held, and how easily you can pull a van’s history for a given period.

Pilot with one team

Choose one depot, one trade team or one group of vans. Run it for a couple of weeks and ask the drivers what slowed them down. Shorten the checklist where it repeats itself. Adjust the wording so it matches what drivers actually call things.

Train drivers in ten minutes

Show the drivers the check on their own phone and the van they drive. Explain what happens after they report a defect, because drivers stop reporting if they think nobody reads it. Make clear that a flagged defect is a good thing, not a mark against them.

Set a daily routine for the manager

Someone should look at the dashboard each morning: checks missing, defects open, vans off the road. A missed check is visible straight away, so you can chase it before the van leaves. The review takes a few minutes and is the habit that makes the records meaningful.

Plan the wider picture

Once checks are bedded in, connect them to maintenance. Our guide to fleet maintenance tracking covers servicing, MOT and document reminders, and our piece on construction tool tracking covers equipment on the same vans. For fleets with several branches, a single view across all of them saves the manager from collecting reports site by site.

Fleet Titan for daily checks and compliance

Fleet Titan is a fleet management platform for businesses with van fleets. It brings daily checks, defect management, MOT, insurance and tax reminders, tool and stock tracking, job assignment, customer quotes and invoicing, and reporting into one dashboard. Our features page shows how each part works.

Plans are billed monthly and priced by fleet size: Essential is £19.99 per month, Connect £59.99, Control £89.99 and Advanced £199.99, with Advanced+ available on the pricing page. Early sign-ups receive extended free access, and the pricing page has the current terms.

Fleet-titan

If you would like someone to look at your vans in person, we also offer onsite audits: a vehicle inspection at £15.00 per van, a tool inspection at £15.00 per van, or both on one van for £25.00 per van, each as a one-off. Details are on our home page.

FAQ

Are digital vehicle inspections accepted by the DVSA?

Yes. The DVSA’s roadworthiness guidance says electronic records of reported defects are acceptable. The system must provide a suitable digital signature, secure data input and storage, and confirmation that the vehicle is roadworthy at the start of the journey. The records must be available for 15 months, along with any record of repair.

How often should a vehicle be checked?

The DVSA guidance says a walkaround check must be done before the vehicle is used on the public highway, and at least one check in every 24-hour period the vehicle is in service. For most van fleets that means one check at the start of each working day for each van in use.

What should a digital inspection record contain?

It should include the vehicle registration, the date, the details of any defect, the name of the person reporting it and who it was reported to. It should also hold the assessment of the defect, the rectification work and the date that work was completed. A nil report confirms the check was done and nothing was found.

How long do I need to keep inspection records?

Defect reports and repair records must be kept for at least 15 months. The DVSA recommends keeping nil defect reports for at least 3 months. Digital storage makes it simple to keep everything for the longer period and find it again quickly.

Sources

Created using BabyLoveGrowth